British Fires KNIGHTWOOD Installation & User's Instructions

British Fires KNIGHTWOOD Installation & User's Instructions

Led electric fire

Advertisement

Quick Links

UK
KNIGHTWOOD LED ELECTRIC FIRE
INSTALLATION & USER INSTRUCTIONS
© 2023 British Fires
xxiii

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KNIGHTWOOD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for British Fires KNIGHTWOOD

  • Page 1 KNIGHTWOOD LED ELECTRIC FIRE INSTALLATION & USER INSTRUCTIONS © 2023 British Fires xxiii...
  • Page 2: Table Of Contents

    DO NOT cover the fan of the heater. DO NOT clean the appliance with abrasive 12.0 Operating the Knightwood 16–19 the hazards involved. Children shall not DO NOT use this heater with a programmer, chemicals.
  • Page 3: Appliance Data

    INSTALLATION REQUIREMENTS APPLIANCE DATA These appliances are supplied with a pre-wired KNIGHTWOOD LED ELECTRIC FIRE Item Symbol Value Unit Item Unit Item Unit three pin plug (13 Amp fuse rated) and 1.8 metres HEAT OUTPUT TYPES OF HEAT INPUT, FOR ELECTRIC STORAGE LOCAL SPACE HEATERS ONLY OTHER CONTROL OPTIONS of electrical cable.
  • Page 4: Component Checklist

    This appliance is heavy. Always seek assistance whilst unpacking and/or during installation. Please read all the Please read completely through the instructions and verify that all listed parts are present before assembly. instructions before continuing to unpack or install the appliance. © 2023 British Fires...
  • Page 5: Preparing The Appliance

    IMPORTANT Once the front glass has been removed from the appliance, carefully remove the tape from either side of the firebox. © 2023 British Fires...
  • Page 6: Installation Overview

    IF INSTALLING THE APPLIANCE INTO AN EXISTING CHIMNEY BREAST THE FLUE MUST BE BLOCKED OFF. British Fires assumes absolutely no responsibility for Insert the appliance in to place then with a pencil, mark Once the appliance is in the correct injuries and damages that may occur due to improper out on the wall the 2x hole positions.
  • Page 7: Installation - Stud Wall

    DO NOT DRILL 1549 mm DIRECTLY UNDERNEATH APPLIANCE 742 mm OPEN DIMENSIONS FOR KNIGHTWOOD IMPORTANT: STUDWALL INSTALLATION Do not drill through the appliance when installing the cladding into position! The power cable is located at the bottom HEIGHT WIDTH DEPTH...
  • Page 8 Insert the two (2x) 1½ inch wood screws that secure the fuel bed into position. Use a cross headed screwdriver to screw the (4x) screws through the glass retaining bracket of the appliance, holding the glass in place. Crosshead screws © 2023 British Fires...
  • Page 9 11.0 PAIRING THE REMOTE CONTROL 12.0 OPERATING THE KNIGHTWOOD REMOTE CONTROL The ON/OFF switch is located on the front, top left hand Within 1 minute of turning the power on by the main ON/ side of the appliance. Press the O/I button once to turn...
  • Page 10 12.0 OPERATING THE KNIGHTWOOD STANDBY BUTTON: HEATING OPERATIONS: FUEL BED COLOR OPTIONS: SETTING SLEEP TIMER: Control Down Lighting: Turns the appliance ON/OFF standby, Press the heater button to turn 3) Fan delay function: Af t er the This appliance has a non-self-reset- Once powered, press the “Fuel Bed”...
  • Page 11: Safety Cut-Out System

    12.0 OPERATING THE KNIGHTWOOD 13.0 SAFETY CUT-OUT SYSTEM 14.0 CLEANING AND MAINTENANCE HEAT SETTINGS: save the selected option and enter After entering the week timer CLEANING: HANDSET BATTERY REPLACEMENT setting, then press the & Use the remote control’s Heater the current setting of the option,...
  • Page 12: Troubleshooting Guide

    15.0 TROUBLESHOOTING GUIDE 16.0 SERVICING THERE ARE NO INTERNAL USER SERVICEABLE PARTS. MY KNIGHTWOOD LED ELECTRIC FIRE... REMEDY This appliances are supplied with a As the colours of the wires in the BS1363 3-pin plug fitted with a 13 mains lead of this appliance may not is not switching on Ensure mains switch is on.
  • Page 13: Spare Parts 18.0 Dimensions

    17.0 SPARE PARTS 18.0 KNIGHTWOOD DIMENSIONS Knightwood LED Electric Fire Spares 1 – F960338 Rear Glass Panel 2 – F960340 Rear Glass Retaining Bracket 3 – F960307 Front Glass Panel 4 – F960264 Front Glass Retaining Bracket 802.0 mm 5 – F960273 Remote Receiver 1525.0 mm...
  • Page 14 If you wish to make a claim under our guarantee and all the terms and condi- force. All of our fires carry UKCA & CE Approval. July 2023 British Fires tions for your appliance have been met then please submit the following infor- Ltd.
  • Page 15 Except where otherwise stated, all rights, including copyright in the text, images All instructions must RBK House and layout of this booklet is owned by British Fires. You are not permitted to copy be handed to the user Irishtown, Athlone Co.

Table of Contents