British Fires NEW FOREST Installation & User's Instructions
  1. Manuals
  2. Brands
  3. British Fires Manuals
  4. Indoor Fireplace
  5. NEW FOREST
  6. Installation & user's instructions

British Fires NEW FOREST Installation & User's Instructions

Hide thumbs Also See for NEW FOREST:

Advertisement

Table of Contents

//
INSTALLATION & USER INSTRUCTIONS
NEW FOREST ELECTRIC FIRE
© 2019 British Fires

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NEW FOREST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for British Fires NEW FOREST

Summary of Contents for British Fires NEW FOREST

  • Page 1 INSTALLATION & USER INSTRUCTIONS NEW FOREST ELECTRIC FIRE © 2019 British Fires...

  • Page 2: Table Of Contents

    This appliance is only suitable for well-insulated spaces or occasional use. DO NOT use this heater with a programmer, timer, separate remote-control system or any other device that switches the heater DO NOT use this appliance in an open flue. © 2019 British Fires...

  • Page 3: Installation Requirements

    2.0 INSTALLATION REQUIREMENTS 3.0 APPLIANCE DATA FOR THE NEW FOREST ELECTRIC FIRE EF40-48A The appliance is supplied with a pre-wired three pin plug This fire is fitted with LED’s (Light Emitting Diode) in Weight (kg) 50kg (13 Amp fuse rated) and 1.8 metres of electrical cable. It place of conventional bulbs.

  • Page 4: Component Checklist

    This appliance is heavy. Always seek assistance whilst Please read completely through the instructions and verify that unpacking and/or during installation. Please read all the all listed parts are present before assembly. instructions before continuing to unpack or install appliance. © 2019 British Fires...

  • Page 5: Installation

    8.0 INSTALLATION 8.1 INSTALLATION – STUDWALL Stud wall installation British Fires assumes absolutely no responsibility for injuries and The stud wall MUST include a header at the dimensions, damages that may occur due to improper installation or handling. highlighted on the following pages. This is to ensure...

  • Page 6: Installation – Stud Wall

    300mm 570mm 1180mm 300mm b e m a d e f r o m a n o n - c o m b u s t i b l e material, such as calcium silicate/ fireboard. © 2019 British Fires...

  • Page 7: Installation – Floating

    50mm Secure the mounting bracket to the wall by using all 8 wall-fixing screws. Carefully, install the appliance back onto the wall bracket. © 2019 British Fires...

  • Page 8: Installation – Floating

    Small trim Underneath the appliance, with the surround screws, screw up through the bottom surround and into the legs of the surround top section and up through the floating shelf brackets on the appliance the top section. © 2019 British Fires...

  • Page 9: Forest View Fuel Bed Layout

    IMPORTANT – Place the logs carefully on the fuel bed so you do not make contact with the rear and side glass. Contact with glass may cause damage. Using the contents from the Husk bag, cover the area on the frosted bed that is still exposed, making sure the crystals are still visible. © 2019 British Fires...
  • Page 10 IMPORTANT – Place the logs carefully on the fuel bed ensuring you do not make contact with the rear or side glass. Coming into contact with glass may cause damage. © 2019 British Fires...
  • Page 11 Take the larger crystals and place these in position as shown in image 2, left. For the best results, remove a small amount of the small crystals and place the larger crystal directly on the frosted base. © 2019 British Fires...

  • Page 12: Pairing The Remote Control

    Press to enter the time and week 74°F, 75°F, 76°F, 77°F, 78°F, 79°F, 80°F, timer settings. 81°F, 82°F, ON, 62°F (Cycle) * Press and hold the heater button for 3 seconds can transfer from °C to °F. © 2019 British Fires...

  • Page 13: Operating The Appliance

    The current clock must be set after the initial power-on or power- off, otherwise the clock will remain “00:00” status and you won’t be able to set the week timer function. © 2019 British Fires...

  • Page 14: Safety Cut-Out System

    Always disconnect the appliance from the mains supply outlet option and enter the current socket before undertaking any cleaning or maintenance! Press the “Heater” button to setting of the option, the timer © 2019 British Fires...

  • Page 15: Troubleshooting Guide

    Excluding fuses, use only g e n u i n e m a n u f a c t u r e r s s p a r e p a r t s available from your supplier. © 2019 British Fires...

  • Page 16: Appliance Dimensions

    C: 1178 mm G: 424 mm At British Fires we pride ourselves on quality and performance, so much We will not accept or reimburse the costs of any third-party who D: 12.5 mm...
  • Page 17 NOTES © 2019 British Fires...
  • Page 18 NOTES © 2019 British Fires...
  • Page 19 Except where otherwise stated, all rights, including copyright in the text, these instructions: GB 1820239.0 Christchurch, Dorset images and layout of this booklet is owned by British Fires. You are not permitted New Forest Electric Fire All instructions must BH23 2BT...

Table of Contents