Page 3
2.0 INSTALLATION REQUIREMENTS 3.0 APPLIANCE DATA FOR THE NEW FOREST 870 ELECTRIC FIRE The appliance is supplied with a pre-wired three This fire is fit ted with LED’s (Light Emit ting Diode) in place of New Forest 870 pin plug (13 Amp fuse rated) and 1.8 metres of conventional bulbs.
9.0 INSTALLATION FOR NEW FOREST 870 ELECTRIC FIRE 9.1 INSTALLATION – STUDWALL British Fires assumes absolutely no responsibility for injuries and The stud wall MUST include a header at the dimensions, damages that may occur due to improper installation or handling.
Page 8
9.1 INSTALLATION – STUDWALL SHELF CLEARANCES Offset Overhang 10 cm *Shelving clearances pictured above must be followed for the New Forest 870 model. Failure to do so may cause the thermostatic control to switch off the product. Header Header Header...
220–240 V AC Outlet plug with 1.8m long cord replaced free of material and labour charges, providing that we have At British Fires we pride ourselves on quality and performance, so much authorised or carried out the repair or replacement. 311.0 mm...
Page 23
Except where otherwise stated, all rights, including copyright in the text, All instructions must RBK House T: 0808 169 9911 images and layout of this booklet is owned by British Fires. You are not permitted be handed to the user Irishtown, Athlone W: britishfires.com to copy or adapt any of the content without the prior written permission of for safekeeping.
Need help?
Do you have a question about the NEW FOREST 870 and is the answer not in the manual?
Questions and answers