Do you have a question about the HS2100 and is the answer not in the manual?
Questions and answers
deb
March 3, 2025
Every night at 2am, my Hisense HS2100 soundbar turns itself on. How do I stop this.
2 comments:
Mr. Anderson
March 3, 2025
To stop your Hisense HS2100 soundbar from turning on by itself, deactivate the Auto-Wake function. Turn on the soundbar, then press the `[ ]` and `+` buttons at the same time on the soundbar. This will disable Auto-Wake, preventing the soundbar from automatically turning on when an audio signal is detected.
This answer is automatically generated
fredmertz
March 9, 2025
This is a waste of time
Calogero Inguaggiato
March 10, 2025
Ho collegato la soundbar tramite cavo AUX, come fare per avere l'accensione automatica sincronizzata **** l'accensione del TV?
1 comments:
Mr. Anderson
March 10, 2025
The Hisense HS2100 soundbar's auto-wake function works only when connected via HDMI ARC with CEC enabled and when both the soundbar and TV support Hisense EzPlay. There is no mention of auto-wake functionality when using an AUX connection.
This answer is automatically generated
Игорь
March 4, 2025
Здравствуйте. Работает только по блютуз. Перестал переключать режимы usb, hdmi rca, мигает фиолетовый индикатор, как вернуть к заводским не могу понять
1 comments:
Mr. Anderson
May 14, 2025
To reset the Hisense HS2100 to factory settings:
1. Switch the soundbar to Optical mode. 2. Press and hold the power button ( [ ] ) on the soundbar. 3. The soundbar will reset to factory settings and enter standby mode.
Note: The device must be in Optical mode to perform the reset, not Bluetooth mode.
3.1.2ch soundbar with wireless subwoofer (20 pages)
Summary of Contents for Hisense HS2100
Page 1
2.1CH Soundbar With Wireless Subwoofer Model: HS2100 USER MANUAL Before using the soundbar, please read this manual thoroughly and retain it for future reference.
Connect Power ....................................10 Pair up with the Subwoofer ......................10 Automatic pairing ....................................10 Manual pairing ....................................10 Use the Hisense EzPlay Function ..............................10 Basic Operation ..........................11 Standby/ON ......................................11 Auto-Standby / Auto-Wake ................................11 Select Modes ....................................... 11 Adjust the Volume .....................................
1. Important Safety Instructions C AUTIO N If the provided plug does not fit into your outlet, consult an electrician for replacement RISK OF ELECTRIC SHOCK of the obsolete outlet. DO NOT OPEN Protect the power cord from being walked on AVIS or pinched particularly at plugs, convenience receptacles, and the point where they exit...
Caution: Battery usage CAUTION Use of controls or adjustments or To prevent battery leakage which may result in performance of procedures other than those bodily injury, property damage, or damage to the described herein, may result in hazardous apparatus: radiation exposure or other unsafe operation. Install all batteries correctly, + and - as To reduce the risk of fire or electric shock, do not marked on the apparatus.
2. What’s in the Box R Remote Control R Main Unit £ AAA Batteries x 2 * R Wireless Subwoofer R HDMI cable R AC Power cord * R Wall mount kit £ AUX cable * R User Manual / Quick Start £...
3. Product Diagram 3.1 Main Unit AUX Socket Connect to an external audio device. USB Socket The USB socket is for service only. OPTICAL Socket Connect to an optical audio output on the HDMI ARC Socket Connect to a TV via HDMI cable. Wall hanging points Remote Control Sensor 3.2 Wireless Subwoofer...
3.3 Remote Control Switch the unit between ON and STANDBY mode. Select the play function. (SOURCE) SURR Adjust the surround ON/OFF. (BT) Select the Bluetooth mode. Press and hold the (BT) button to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
4.3 Placement and Mounting Placement If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand, centered with the TV screen. If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.
5. Connections 5.1 Use the HDMI ARC Socket OPTICAL The ARC (Audio Return Channel) function allows you to send audio from your ARC- compliant TV to your soundbar through a single HDMI connection. OPTICAL To enjoy the ARC function, please ensure your OPTICAL TV is both HDMI-CEC and ARC compliant and set up accordingly.
For Hisense EzPlay, when the Soundbar connects The subwoofer and soundbar will automatically with a Hisense TV via HDMI ARC, therr will be a pair when both units are plugged into the mains Soundbar Setting menu on the TV, and you can sockets and turned on.
Note: deactivate the auto-wake: • This function is available only when both Soundbar and TV support Hisense Ezplay. Lamp Mode • This function requires Soundbar and TV Auto-Wake On connected via HDMI ARC, and the CEC of the The Soundbar will wake up automatically ●...
7.8 Adjust the Brightness • When adjusting the volume, the indicator will increase / decrease the amount of Press the DIMMER + / - button on the light. According to the corresponding light remote control to select brightness level. display / blinking (Fig), determine the current volume level.
The player will also be disconnected when Activate your Bluetooth device and select your device is moved beyond the operational the search mode. range. Select “Hisense HS2100” in the pairing list. After audio prompt, the system is successfully connected and Blue indicator will light up solidly.
11. Troubleshooting I can’t find the Bluetooth name of this unit on my Bluetooth device for To keep the warranty valid, never try to repair the Bluetooth pairing system yourself. If you encounter problems when • Ensure the Bluetooth function is activated on using this unit, check the following points before your Bluetooth device.
12. Specifications Brand Hisense Model HS2100 Soundbar Power Supply 100-240V~ 50/60Hz 20 W Power Consumption < 0.5 W (StandBy) 500mA Hi-Speed USB (2.0) / FAT32 / FAT16 32G (max) , WAV / WMA / MP3 / FLAC. Dimension (WxHxD) 800 x 60 x 90 mm / 31.5" x 2.4" x 3.5"...
Page 16
Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hisense is under license. Other trademarks and trade names are those of their .respective owners The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Page 17
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov. Réglement de la FCC (pour les clients américains) REMARQUE : FCC INFORMATION (for US customers) •...
Need help?
Do you have a question about the HS2100 and is the answer not in the manual?
Questions and answers
Every night at 2am, my Hisense HS2100 soundbar turns itself on. How do I stop this.
To stop your Hisense HS2100 soundbar from turning on by itself, deactivate the Auto-Wake function. Turn on the soundbar, then press the `[ ]` and `+` buttons at the same time on the soundbar. This will disable Auto-Wake, preventing the soundbar from automatically turning on when an audio signal is detected.
This answer is automatically generated
This is a waste of time
Ho collegato la soundbar tramite cavo AUX, come fare per avere l'accensione automatica sincronizzata **** l'accensione del TV?
The Hisense HS2100 soundbar's auto-wake function works only when connected via HDMI ARC with CEC enabled and when both the soundbar and TV support Hisense EzPlay. There is no mention of auto-wake functionality when using an AUX connection.
This answer is automatically generated
Здравствуйте. Работает только по блютуз. Перестал переключать режимы usb, hdmi rca, мигает фиолетовый индикатор, как вернуть к заводским не могу понять
To reset the Hisense HS2100 to factory settings:
1. Switch the soundbar to Optical mode.
2. Press and hold the power button ( [ ] ) on the soundbar.
3. The soundbar will reset to factory settings and enter standby mode.
Note: The device must be in Optical mode to perform the reset, not Bluetooth mode.
This answer is automatically generated