Table of Contents
Advertisement
URSA Broadcast G2 Controls
Blackmagic URSA Broadcast G2 has control panels on the chassis, outside and inside of the
foldout touchscreen monitor to give you quick, easy access to all of its essential functions as
well as powerful monitoring tools. These panels are designed to be close to hand whether
shooting from a tripod, handheld or with the URSA Mini Shoulder Kit.
Forward Control Panel
Your camera's forward control panel groups together all of the controls you might need to
adjust when setting up a shot and recording. These are all designed for easy access while
shooting with the foldout monitor closed, such as when using the shoulder kit.
2
4
6
7
8
9
URSA Broadcast G2 forward control panel
1
Power Switch
Power your URSA Broadcast G2 by moving this switch to the 'on' position. Power off by
moving the switch to the 'off' position.
TIP You can also power your URSA Broadcast G2 on or off via a combination
of control panel switches. Holding the 'rec' and 'forward skip' buttons will power up the
camera if it is turned off, or power it off if it is turned on. If your camera's power switch
is set to 'on' but your camera is powered down, it may have been powered down via
the control panel. Toggle the power switch to return it to normal operation.
2
ND Filters
Your URSA Broadcast G2 has three internal neutral density filters. Together with a clear
filter, the available settings are 1/4, 1/16th and 1/64th. These filters allow you to reduce the
amount of light reaching your URSA Broadcast G2's sensor by a preset fraction.
1
3
5
URSA Broadcast G2 Controls
47
Advertisement
Table of Contents
