Table of Contents
Advertisement
To connect your URSA Viewfinder to your URSA Broadcast G2, simply connect the viewfinder's
attached cables to your camera's front 12V power and 3G-SDI outputs. The URSA Viewfinder
will turn on automatically when your camera is powered.
Connect your viewfinder's SDI and power cables to your URSA Broadcast
G2's HD-SDI monitoring output and +12 volt output
Adjusting the Eyepiece
The detachable rubber eyepiece can be adjusted to fit your left or right eye. Adjust the
viewfinder arm by loosening the knob on the bottom of the arm and sliding it left or right to
comfortably fit your eye.
Button Features
On the top of the viewfinder you'll find the zoom, display and peak buttons. These buttons are
used for zooming into your image, and turning overlays and focus peaking on or off.
The Zoom (F1), Display (F2) and Peak (F3) buttons are
located on top of the URSA Viewfinder
They are also used for additional features, such as opening the menu and navigating settings.
Icons printed on the side of the buttons show you which buttons are used to control the
viewfinder menu and navigation features.
The buttons also have a customizable function feature so you can assign shortcuts to quickly
enable common features you may use frequently. For example you may wish to assign the false
color feature to the zoom button. Refer to the 'shortcuts' section for more information.
ZOOM
F1
DISP
F2
PEAK
F3
Blackmagic URSA Viewfinder
137
Advertisement
Table of Contents
