Table of Contents
Advertisement
7. EXAMPLES OF OPERATION
Setting fixed volume for inputs
INPUT
MENU
SELECT
STANDBY
EXAMPLE 6
Setting fixed volume for inputs
Each individual input on the RI-101 Mk.II can be set to a fixed volume
in the menu. The input is then locked to the set volume step and can
no longer be adjusted. This function is used as the "home theater
bypass" function, if you have a surround processor that controls
the volume.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate
to SETUP – INPUTS and select the desired input.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Select FIXED – SET FIX and use the function buttons to set the
fix to FIX ON, press select. Then select the ADJUST menu point
and use the function buttons to navigate to the desired volume
step. Press select and navigate to the exit menu point and press
select again.
The input has now been set to a fixed volume step and can no longer
be adjusted.
The fix can always be turned off by navigating into the FIXED menu
to set the fix to FIX OFF.
36 | RI-101 Mk.II Owner's manual
MUTE
YOU PRESS
YOU SEE
LINE 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
SELECT
< BACK
INPUT 1 >
SELECT
< BACK
< EXIT
FIXED >
SELECT
< BACK
SET FIX >
SELECT
FIX OFF
FIX ON
SELECT
SET FIX >
ADJUST >
SELECT
-40 dB
0.0 dB
SELECT
ADJUST >
< EXIT
SELECT
LINE 1
Configuring auto standby
INPUT
MENU
SELECT
STANDBY
EXAMPLE 7
Configuring auto standby
The RI-101 Mk.II can be configured to automatically go into standby
after a set time period, after no buttons on the remote or front of
the unit having been pressed. Press the "MENU" button to enter
menu mode.
Use the function buttons on the front of the unit to navigate to
SETUP – AutoStb.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the AutoStb menu and navigate up to the desired auto standby
time, in this case 30 minutes. Then press select and navigate to the
exit menu point and press select again.
The new auto standby time setting has now been saved.
7. EXAMPLES OF OPERATION
MUTE
YOU PRESS
YOU SEE
LINE 1
MENU
< EXIT
SETUP >
SELECT
< BACK
INPUTS >
BRIGHT >
LOGO >
V.INIT >
RESET >
AutoStb >
SELECT
OFF
30 Min
SELECT
AutoStb >
RESET >
V.INIT >
LOGO >
BRIGHT >
INPUTS >
< BACK
< EXIT
SELECT
Line 1
RI-101 Mk.II Owner's manual | 37
Advertisement
Table of Contents
