Changing Input Names - Vitus Audio Reference Series Owner's Manual

7. EXAMPLES OF OPERATION
Disabling inputs
INPUT 
MENU SELECT
STANDBY 
EXAMPLE 4
Disabling inputs
Each individual input on the RI-101 Mk.II can be disabled in the menu.
This will remove the input from being shown when changing inputs
in the normal operation mode.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate
to SETUP – INPUTS and select the desired input.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the USED menu and navigate up or down to choose the NOT
USED menu point by utilising the function buttons. Then press select
and navigate to the exit menu point and press select again.
The input has now been disabled and will not be shown in the menu
during normal operation.
34 | RI-101 Mk.II Owner's manual

MUTE

YOU PRESS YOU SEE
LINE 1
MENU < EXIT
SETUP >
SELECT < BACK
INPUTS >
SELECT < BACK
INPUT 1 >
SELECT < BACK
USED >
SELECT USED
NOT USED
SELECT USED >
BACK
< EXIT
SELECT LINE 2

Changing input names

INPUT 
MENU SELECT
STANDBY 
EXAMPLE 5
Changing input names
The input display text of the RI-101 Mk.II can be set on each
individual input.
Press the "MENU" button to enter menu mode.
Use the function buttons on the front of the unit to navigate
to SETUP– INPUTS and select the desired input.
1. r
Scroll forwards in the menu.
2. MENU/SELECT
Enter and exit submenus and select settings.
3. s
Scroll backwards in the menu.
Enter the TEXT menu and navigate up or down in the text choises by
utilising the function buttons, until the desired text is shown in the
display. Then press select and navigate to the exit menu point and
press select again.
The new text has setting has now been saved on the chosen input.
7. EXAMPLES OF OPERATION

MUTE

YOU PRESS YOU SEE
LINE 1
MENU < EXIT
SETUP >
SELECT < BACK
INPUTS >
SELECT < BACK
INPUT 1 >
SELECT < BACK
USED >
TEXT >
SELECT LINE 1
SCD-025
SELECT TEXT >
USED >
BACK
< EXIT
SELECT SCD-025
RI-101 Mk.II Owner's manual | 35