Table of Contents
Advertisement
3.5
Ignition switch and steering lock
WARNING
Do not attach a ring or any other object
to the ignition key as they may hinder the
steering action. Never attempt to change
the switch functions while riding,as you
may lose control of the vehicle.
Always check the absence of any
restriction in the steering action befero
you ride.
The ignition switch enables and disables the electrical
circuit and the steering lock. The four positions of the
switch are described below.
OFF position
All electrical circuits are deactivated. The key can be
removed.
ON position
All electrical circuits are activated. The instruments and
warning lights perform the self-diagnostic cycle. The
engine can be started. The key cannot be removed.
LOCK position
Turn the handlebar to the left. Press the key in gently
while rotating it to the LOCK position.
All electrical circuits are deactivated and the steering is
locked. The key can be removed.
"P" Position
CAUTION
Do not leave the key on the P position for
a long time, in order to avoid discharging
the battery of your motorcycle.
Turn the key from the LOCK position to the P position
(parking).
All electrical circuits are deactivated except the parking
lights (position lights). The steering is locked.
The key can be removed.
Tornado Naked Tre 1130
Tornado Naked Tre 1130
21
22
Advertisement
Table of Contents
