Xylem FLOJET 01752 C Series Installation And Operation Manual page 2

Inline Water Pressure Regulator — 01752XXX / 01754XXX SERIES
INSTALLATION &
OPERATION DESCRIPTION
FLOJET's Inline Water Pressure Regulator reduces inlet water pres-
sure to safe levels for pumps and appliances. Models are available
in pre-set, non-adjustable maximum (nominal) outlet pressures.
Actual outlet pressure varies with inlet flow rate and pressure,
reference performance section on the next pages for details.
MOUNTING/PLUMBING
• Read General Safety Information below before starting.
• Position regulator before the boost pump/equipment/appli-
ance inlet side.
• When possible, mount regulator where visible and accessible
for cleaning.
• Arrow on regulator indicates direction of flow.
• Regulator may be mounted vertically or horizontally.
• Plumb regulator to braided, high-pressure, flexible tubing on
both ends, and secure with Stepless stainless-steel clamp. Do
not plumb regulator directly to rigid tubing, or any pipe.
• Secure regulator and tubing with cable ties to reduce possibili-
ty of stress to regulator and tubing.
NOTE: Water pipe connections and fixtures directly con-
nected to a potable water supply shall be sized, installed and
maintained in accordance with federal, state and local codes.
CLEANING
Inlet port should be inspected and cleaned several times per year
or more depending on water quality. See General Safety Informa-
tion below before attempting.
GENERAL SAFETY INFORMATION
Protect yourself and others by observing all safety information for
equipment and appliances. Shut off all power and drain pressure
from system prior to any installation, removal or service.
PRODUCT DATA
Design
Ports
DIMENSIONS
Dimensions Pouces (Millimètres) / Abmessungen Zoll (Millimeter) / Dimensioni Pollici (millimetri) / Afmetingen Inch (Millimeters)
Mått tum (millimeter) / Dimensiones pulgadas (milímetros)
1.6
(40.64)
1.9
(48.26)
Inline water pressure regulator
Quick Connect
Inches (Millimeters)
.8
(20.32)
PERFORMANCE SPECIFICATIONS
Inlet water pressure
Fluid temperature
Compliance
TYPICAL APPLICATIONS
Water supply
Water regulator
Water supply
Water regulator
6
(152.4)
3.8
(97.1)
3.5
(88.9)
2
150 psi (10.3 bar) max.
33–120°F (1–48°C)
See table
Air operated
water booster pump
Beverage
dispenser
Beverage
Electric water
dispenser
booster pump
2x 10/13 mm 3/8"
HB PP