Calibration: Connect 3 test probes to the test sockets 1,
2 and 3. Connect the 3 tips to start the automatic
calibration. During the calibration process, you will be
prompted to disconnect the test probes again.
Afterwards, the calibration is completed automatically.
8. SETTINGS
Press and hold the menu button to open the settings.
Here you can make the following configurations:
Logo: Disables or enables the logo when the device is
booted.
Language: Switches the language between English and
German.
Volume: Continuous adjustment of the device volume.
The setting does not affect the sound during the conti-
nuity test.
Brightness: Stepless adjustment of the screen bright-
ness.
Auto-Menu: On: Opens the last selected menu when
the device is switched on. Off: Starts the device in the
main menu.
11