After you have saved your component, you can start the
test by pressing the OK button.
K-A-A TEST SOCKETS: The K-A-A test sockets are a
special range for the measurement of forward voltages
in reverse direction. A voltage of 30 V or more is applied.
The K-terminal represents the positive pole, the A-
terminal the negative pole..
CAPACITOR MEASUREMENT: Always discharge your
capacitor before taking a capacitance measurement.
Otherwise, the device could be damaged.
USE OF COMPONENTS WITHIN SPECIFICATIONS:
Please ensure that all components under test operate within their
specified operating parameters. Using components outside their
specifications can lead to inaccurate test results and, in the worst
case, even damage the device or the component under test.
DEVIATIONS AND MISIDENTIFICATIONS:
Despite the advanced technology and high accuracy of our
instrument, there may be variations in the test results with such a
wide variety of components. It is also possible that some components
may not be identified correctly or at all due to their specific character-
istics or conditions.
7