SWorkz S35-4e EVO Instruction Manual
  1. Manuals
  2. Brands
  3. SWorkz Manuals
  4. Motorized Toy Car
  5. S35-4e EVO
  6. Instruction manual

SWorkz S35-4e EVO Instruction Manual

1/8 off road brushless power pro buggy
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S35-4e EVO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SWorkz S35-4e EVO

Summary of Contents for SWorkz S35-4e EVO

  • Page 2: Introduction

    The SWORKz S35-4e EVO standard includes the Arched-Bridge-System and the higher capacity shock system. This is a big step for S35-4e EVO, the design made the car go faster and be more stable. In the kit we include a special BBS piston and oil seal parts that the worlds team drivers tested during the race.

  • Page 3: Warranty

    Contact your local hobby shop or SWORKz distributor for all claims and questions. Claims must be well documented. All Claims are subject to expert...

  • Page 4: Table Of Contents

    7-32 Set-up Sheet 33-35 S35-4e EVO Key No. List 36-37 S35-4e EVO Spare Part No. List 37-38 S35-4e EVO Option Part No. List End cover This radio controlled racing car is not a toy! This high-performance R/C model is recommended for ages 14 and older.

  • Page 5: Required Equipment For Operation

    SW-620020-20 SWORKz SST-Pro 2.0mm HEX Wrench Modeling knife SW-620020-25 SWORKz SST-Pro 2.5mm HEX Wrench Instant cement Thread lock Double-sided tape SW-620025 SWORKz SST-Pro Shorty 7.0mm Socket Driver SW-620026 SWORKz SST-Pro Shorty 5.5mm Socket Driver Included items Glow plug wrench Hex wrench 1.5mm Grease 2.5mm...

  • Page 6: Operation Guide

    The SWORKz S35-4e EVO is a high performance radio controlled model which needs to be operated with caution and common sense. The S35-4e EVO Pro Kit is not intended for children under the age of 14 without adult supervision. SWORKz shall not be held liable for any loss or damages, whether direct, indirect, act of nature, arising from the abuse or misuse of this product or any other product required while operating this model.

  • Page 7: Assembly Steps

    610023P 328001 101004 101004 101004 Washer 3.5X10X0.2mm 328001 101004 338025 328001 101004 Fill the differentials with oil up to 80% above the satellite gears. Put the SWORKz Diff. Oil 10000cps for the front Diff. and 5000cps for the rear Diff.
  • Page 8 M3x12mm FH/ST HEX Screw 108001 338025 S35-3W Bevel Gear Shaft 101004 Washer 3.5X10X0.2mm 610020P 101004 101004 328001 338025 328001 101004 Fill the differentials with oil up to 101004 above the satellite gears. Put the SWORKz Diff. Oil 10000cps for the center Diff.
  • Page 9 Pro Tip: Before installing the M5x4 set screw (104010), remember to clean the set screw and center driver joint (330661A) first. Then apply TLC on the set screw. 338023 106019R 338011 106019R 104010 M5x4mm Set Screw (Flat Bottom) 228001DG (#8 #9 #10) 330661A 2503261A 108001...
  • Page 10 Pro Tip: Before installing the M5x4 set screw (104010), remember to clean the set screw 338023 and center driver joint (330661A) first. Then apply TLC on the set screw. 106019R 108001 M3x12mm FH/ST HEX Screw 338011 330661A 108005 106019R M3x14mm FH/ST HEX Screw 228001DG (#2 #3 #4) 104010 338082A...
  • Page 11 108008 M3x35mm FH/ST HEX Screw 101020A 3mm Countersunk Washers (GM) 228001DG (#5 #6 #7) 338056 338058A 108008 228001DG (#5 #6 #7) 101020A 338056 OPTION: S35-4 Series Lower Arm Hinge Pin (68.5mm) SW-228005S-F S35-4 Series Front Lower Arm in Soft Material (1PC) SW-228005M-F S35-4 Series Front Lower Arm in Medium Material (1PC) 2503261A Pop in the Stabilizer Guide.
  • Page 12 104005 M3x4mm Set Screw 106013 M2.5x8mmH ex Socket OH/TPScrew 106013 104005 Note: The aluminum front upper arm holder (338057A) can offer either 0° or + -1° kick-up for your front upper arm suspension. You may use the inserts 228001DG (#13) to get 0° kick-up or 228001DG (#12) to get +-1°...
  • Page 13 M2.5x14mm Soket OH/ST Screw (1.5mmHex) OPTION: OPTION: 348003-10 228015S SWORKz SWORKz S35-4 Series Pro-composite Carbon Arched-Bridge-System Rear Lower Arm Cover(1.0mm)(2PC) S35-4 Series Arched-Bridge-System Rear Lower Arm Set (Soft)(1PC) 348003-15 228015M SWORKz 103004 SWORKz S35-4 Series Pro-composite Carbon Arched-Bridge-System Rear Lower Arm Cover(1.5mm)(2PC)
  • Page 14 108005 330399B 106002 M3x10mm Hex Socket OH/TP Screw 228006 108001 338113 M3x12mm FH/ST HEX Screw 108005 M3x14mm FH/ST HEX Screw 106002 108001 PRO TIP: The S35-4 EVO Aluminum Rear Lower Fully Adjustable Toe-In Block (330770) can use 3 types of square inserts to get 1.0/2.0/3.0 3 different toe in angles.
  • Page 15 2503261A Pop in the Stabilizer Guide. 104004 M3x3mm Set Screw 104004 OPTION: SW-115046 S35/S350 Series Rear Sway Bar 2.4mm SW-115047 S35/S350 Series Rear Sway Bar 2.5mm SW-330499 S35/S350 Series Rear Sway Bar 2.7mm SW-115007 S35/S350 Series Rear Sway Bar 3.0mm 104004 115005 (2.8mm) 115006 (2.6mm)
  • Page 16 PRO TIP: 228017 For some track corner conditions, you may need a big steering angle, 116004R there is an option part SW-338124P will give you the solution. 103001 M3 Nut Lock 106007 117003 101012 M3x6xT0.6mm 338124 117003 338126 117003 Flange Ball Bearing 3x6x2.5mm 338123 117003 101012...
  • Page 17 106002 338122R (Clockwise) 106002 M3x10mm Hex Socket OH/TP Screw Right 348005 338122R (Clockwise) 338122L S35/S350/Apollo Series Lightened Steering Knuckle 338122L Pivot Ball Turnbuckle (Anti-Clockwise) (　Anti-clockwise) 2503260-04 338122R 330118A S35/S350/Apollo Series Left Lightened Steering Knuckle Pivot Ball Turnbuckle (Clockwise) 330118A 2503264A 338122L (　Anti-clockwise) 2503260-04 Screw and adjust 330118A Knuckle...
  • Page 18 330117A 330117A Left 104010 OPTION: M5x4mm Set Screw (Flat Bottom) SWC-218007A S35 Series Evolution-CVA Drive Shaft Set 92.5mm (1 Set) 330124 OPTION: Pin M3.0x16.8mm SWC-218007D SW-338075 S35 Series Advance-CVD Drive Shaft 210046 S35-4 Series T7 Set 92.5mm (1 Set) Aluminum Rear Wheel Hub With 106009 BB Insert (R=L)
  • Page 19 PRO TIP: The base set up is always by using 2-3mm inserts on the rear of Hub Carriers Hinge Pins. 2503260 The wheel base length should be around 325-330mm. (#5 #6 #7) 2503260 103001 (#5 #6 #7) 330782 103001 103001 M3 Nut Lock 330782 330782...
  • Page 20 Longer Upper Arm Linkage Set-up 105012 105012 M3x10mm Cap Screw 106009 228001DG M3x25mm Hex Socket OH/TP Screw 103001 M3 Nut Lock 106009 105012 103001 228001DG OPTION: SWC-338017 S35 Series T-6061AL Rear Hub Carry Insert (6mm)(2pc) 106009 Shorty Upper Arm Linkage Set-up 103001 108019 103001...
  • Page 21 108007 108007 108007 338125 108007 228004A 108007 M3x6mm FH/ST HEX Screw 108007 108007 108007 108007 228004A 108007 108003 M3x10mm FH/ST HEX Screw Front 108010 Top View M4x10mm FH/ST HEX Screw Rear 108012 M4x16mm FH/ST HEX Screw 2501097B 108012 108010 108003 108012...
  • Page 22 106010 106002 228019 106010 750 BL Motor is not included 106002 228019 106006 M3x10mm Hex Socket OH/TP Screw 3mm hole 106006 104011 4mm hole 348008 M3x20mm Hex Socket OH/TP Screw 228007-2 330245 106008 106008 M3x12mm Hex Socket OH/TP Screw 228007-2 106010 PRO TIP: M3x6mm Hex Socket OH/TP Screw...
  • Page 23 106006 M3x20mm Hex Socket OH/TP Screw 103001 2501529 108003 M3x10mm FH/ST HEX Screw 106006 108012 330663A-112 M4x16mm FH/ST HEX Screw 103001 M3 Nut Lock 108012 108012 108003 1/8 ESC is not included 108013 M4x8mm FH/ST HEX Screw 228019 108013...
  • Page 24 Saddle Pack Battery Chassis Assembly 103005 103005 108010 228020 M4x10mm FH/ST HEX Screw 103005 M4 Nut Lock 228020 108010 S14.8 4S Pack Battery Assembly 108006 103005 108006 108006 M3x8mm FH/ST HEX Screw 228020 228020 228020 108010 M4x10mm FH/ST HEX Screw 108013 M4x8mm FH/ST HEX Screw 103005...
  • Page 25 Right Steering Linkage Set up by Straight Ball Ends 330126A 20.6 mm 20.6 mm Steering Turnbuckle 2503270 (#3) 330779 330126A 330779T-ST 2501121C Steering Linkage Set up by Curve Ball Ends 20.9 mm 20.9 mm 106002 M3x10mm Hex Socket OH/TP Screw 106002 108021 M3x18mm FH/ST HEX Screw...
  • Page 26 348009 228018 228021 228021 (25T) (23T) OPTION: SW-338078-25 SWORKz Uni-Design 2-Way System Aluminum Steering Servo Horn 25T SW-338078-23 SWORKz Uni-Design 2-Way System Aluminum Steering Servo Horn 23T 106007 101026 S102 Aluminum Washer 3X6X1.5mm 106007 M3x12mm Hex Socket OH/TP Screw (HT)
  • Page 27 106025 Receiver is not included 228019 108007 228019 228019 104004 M3x3mm Set Screw 108006 108006 104004 200193 M3x8mm FH/ST HEX Screw 108007 M3x6mm FH/ST HEX Screw 106025 M2.5x8mm Hex Socket OH/TP Screw...
  • Page 28 103004 101011 Front 330634(S) Front 338063A(S) Rear 330633(L) Rear 338062A(L) 338062A 400020 S35-4 Series BBS System Teflon Coated Durable Shock Shaft (L) 400006 338063A S35-4 Series BBS System Teflon Coated Durable Shock Shaft (S) 228016-Seal 103004 Front 228016-1.2-8 M2.5mm Nut Lock 330557 Rear 228016-1.3-8 228006...
  • Page 29 330138B 105005 101010A 105005 M3x12mm Cap Screw 101010A 101010A 105005 105005 105021 105021 105021 M3x6mm Conical Head Screw 330243 (Anti-Clockwise) 330243 SWORKz 3x16mm Shock Hex Screw Clockwise 330243 330243 SWORKz 3x16mm Shock Hex Screw Anti-Clockwise 105021 105021 330243 (Anti-Clockwise) 330243...
  • Page 30 M3x25mm Cap Screw 101010A 101010A 105006A 105013A 103003A 103003A Flange M3 Nut Lock 103003A 106003 M3x16mm Hex Socket OH/TP Screw 330243 (Anti-Clockwise) 330243 SWORKz 3x16mm Shock Hex Screw Clockwise 330243 103003A 330243 SWORKz 3x16mm Shock Hex Screw Anti-Clockwise 103003A 330243 (Anti-Clockwise) 330243...
  • Page 31 105025 228008BK 228008BK 105005 M3x12mm Cap Screw 39mm 39mm PRO TIP: Attention! 106025 Please do not follow the M2.5x8mm Hex Socket OH/TP Screw wing hole markings to 228008BK drill. Please drill both holes 0.5mm inwards. 330122A Wheel Nut Tires and wheels Tires and wheels are Not included are Not included...
  • Page 32 Use water/washing solution to clean body. Apply window masks as shown. 518003 258001C-E Paint body. 115019 106010 Button Head Screw M3x6mm 106010 115019...

  • Page 33: Set-Up Sheet

    Race time / Lap: SET-UP SHEET Best lap: Diff. Oil Track Conditions Name: SWORKz S35-4e EVO Size: Open Med. Tight Front: #10000 Date: 2023 Traction: High Med. Center: #10000 Track: Surface: Smooth Med. Bumpy Basic Setup Rear: #5000 Electric System...
  • Page 34 Race time / Lap: SET-UP SHEET Best lap: Diff. Oil Track Conditions Name: Size: Open Med. Tight Front: Date: Traction: High Med. Center: Track: Surface: Smooth Med. Bumpy Rear: Electric System Tire Motor Gear/Spur Gear: Front Rear ESC Type: Type: Type: A: Standard Pack Battery Type...
  • Page 35 Race time / Lap: SET-UP SHEET Best lap: Diff. Oil Track Conditions Name: Size: Open Med. Tight Front: Date: Traction: High Med. Center: Track: Surface: Smooth Med. Bumpy Rear: Electric System Tire Motor Gear/Spur Gear: Front Rear ESC Type: Type: Type: A: Standard Pack Battery Type...

  • Page 36: S35-4E Evo Key No. List

    S35-4/e EVO Series Lay-Down Type Steering Bellcrank Set 1 SW-228017 348009 S35-4e EVO Electric Series Pro-composite Carbon Steering Servo Mount Plate 1 SW-348009 228018 S35-4e EVO Electric Series Steering Servo Mount & Rear Upper Deak Holder 1 SW-228018 400002 O-ring S5 4.8X1.5 6 SW-400002 228019 S35-4e EVO Electric Series Receiver Box &...

  • Page 37: S35-4E Evo Spare Part No. List

    S35-4/e EVO Series Lay-Down Type Steering Bellcrank Set 106021A S35 Series M4x10mm Hex Soket OH/TP Set Screw 4 SW-106021A SW-228018 S35-4e EVO Electric Series Steering Servo Mount & Rear Upper Deak Holder Set 106022 M2.5x14mm Soket OH/ST Screw (1.5mmHex) 4 SW-106022 SW-228019 S35-4e EVO Electric Series Receiver Box &...
  • Page 38 S35-4e EVO Electric Series Pro-composite Carbon Center Diff. Plate(1PC) SW-115019 Body Clip SW-348009 S35-4e EVO Electric Series Pro-composite Carbon Steering Servo Mount Plate(1PC) SW-115035A S35/350 Series Front Sway Bar 2.2mm SW-340003 S35-3 Series Pro-composite Carbon Front Upper Arm Cover Set (1mm) SWC-115182 S35-4 Black Competition Front Shock Spring (US4-Dot)(62X1.6X7.5)

  • Page 39: S35-4E Evo Option Part No. List

    High Performance Ball Bearing 5x10x4mm(coffee)(4pc) SWC-116019A SWORKz Competition 5x13x4mm Ball Bearing (Metal Case)(4PC) SW-250050 SWORKz 1/8 Off Road Formula Bulkhead Wing (4PC)/ Front Upper Arm's Wing Set (4PC) SWC-116019B SWORKz Competition 5x13x4mm Ball Bearing (Metal Case/Japan)(4PC) SW-250050A SWORKz 1/8 Off Road Formula Bulkhead Lexan Wing (0.8mm)(4PC) SW-218001 S35/350 Series Font Sway Bar Set (2.0/2.1/2.2/2.3/2.4/.2.5/2.6/2.8mm)

Table of Contents

Save PDF