Troubleshooting - Philips HR2660/00 User Manual

Cleaning
1 Disconnect the plug from the power outlet.
2 Remove the mixing chamber lid. (Fig. 3)
3 Loosen the front panel control knobs. (Fig. 4)
Note: The front panel is heavy. Take extra caution when removing it.
4 Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing paddle,
and the mixing chamber in order. (Fig. 5)
5 Use a dry cloth to clean flour residue on the main unit. (Fig. 26)
6 Clean the shaping disc with the supplied cleaning tool to remove the dough residues.
After that, you can clean it with water. (Fig. 27)
Note: Let the discs air-dry for 2 to 4 hours, then use the corresponding cleaning tool to
poke out the dough in the holes.
7 Clean all detachable parts, and wipe them dry. (Fig. 6)
8 Use a dry cloth to clean the control panel, and the exterior of the pasta
Storage
1 Unplug the appliance and let it cool down. (Fig. 25)
Note: Make sure all parts are clean and dry before storing.
2 You can store the shaping discs in the storage drawer. (Fig. 29)
Note: Put the thicker shaping discs in slots with icons and , and put the thinner shaping
discs in the slots with icon . (Fig. 30)

Troubleshooting

This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked questions or contact the Consumer
Care Center in your country.
Problem
The indicators do not
light up.
After pressing the
On/off button the
appliance sounds but
does not work.
(Fig. 25)
Cause
The power plug is not
connected correctly.
The mixing chamber,
the shaping disc, or the
front panel is assembled
incorrectly.
maker.
Solution
Check whether the power plug is
plugged correctly and the outlet is
working properly.
Make sure you follow the user manual
to assemble all parts correctly.
ENGLISH
9
(Fig. 28)