Table of Contents
Advertisement
a 3 protective sheets
for use when fitting the tower.
b 1 exhaust connection for exhaust
ducting C 150 mm.
c 1 reducing collar
for C 125 mm exhaust ducting.
d 1 non-return valve
for fitting into the exhaust connection
on the motor unit (not for
recirculation mode)
e 1 cover plate
for fitting to the deflector connection
in recirculation mode
f Telescopic wall bracket for
securing the cooker hood to the wall.
g Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose with clips (this is not
included, but is available as an
optional extra - see Technical Data).
6 screws 5 x 40 mm and
6 x S 8 plugs for securing the wall
bracket.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
Installation
27
Advertisement
Table of Contents
