Fitting And Replacing The Charcoal Filter - Miele DA 428-4 EXT Operating And Installation Instructions

Cleaning and care
Fitting and replacing the
charcoal filter
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
It is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filters.
New filters can be purchased from
your Miele Dealer / Chartered Agent
or from the Miele Spare Parts
Department.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^ Take the charcoal filter out of its
packaging.
^ Insert the charcoal filter into the back
of the charcoal filter frame, then push
up into the frame at the front.
When fitting for the first time:
^ Set the operating hours counter to
suit your requirements (see
"Operation").
24
Always replace the charcoal filter im-
mediately if
– the indicator lamp for the charcoal
filter touch control lights up,
or
– if it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
^ After fitting the new charcoal filter,
press the charcoal filter touch control
for approximately 3 seconds to re-set
the operating hours counter.
The indicator lamp will go out.
If a charcoal filter is replaced before the
operating hours counter has reached
its maximum, the charcoal filter touch
control should be pressed for
approximately 6 seconds to reset the
counter.