Before using the dishwasher, read the user instructions!
GSF 2581
Programme selector knob
On / Off button
Start button
Switches "on" when the
dishwasher is operating. Flashes
when a fault occurs. Switches off
at the end of the programme.
Indicators
Add regeneration salt
Only add regeneration salt
immediately before starting a
wash programme.
Add rinse aid
Programme chart
Programmes
Pre-Rinse
cold
Rapid 30 min
40°C
1)
50°C
Eco
Normal
65°C
Intensive
70°C
1)
Reference programme for energy label in
compliance with EN 50242 regulations;
2)
Refer to "User instructions";
Important information for Test Laboratories:
For detailed information on the EN comparison test and other tests, contact the following address:
"nk_customer@email.whirlpool.com".
Quick Reference Guide
Loading instructions
Crockery to be washed later.
Lightly soiled crockery, with no
dried-on food.
Normally soiled crockery.
Normally or heavily soiled crockery.
Heavily soiled crockery, especially pots
and pans.
Wash cycle
Pre-Rinse
Washing
Options
Time and failure display
Indicates in hours the time remaining
until the start of the wash cycle.
Switches off when the programme
starts and indicates the time remaining
in hours and minutes.
"F..." Information for the After-
Sales Service
"Delayed start" buttons
The wash cycle can be programmed to
start after 1 - 24 hours. With each
successive touch of the button, the
delayed start indicator increases by 1
hour, and after 24 returns to 00. Then
press the Start button. The dishwasher
will start at the set time.
2)
Detergent
A
B
-
-
X
-
X
X
X
X
X
X
3)
Program data obtained in conformity with
European standard EN 50242. Values may vary in
relation to usage, e.g.: different loads, water
temperatures - above or below 15°C - as well as
water hardness and power supply voltage, etc.
5019 496 90264
(We reserve the right to make technical modifications)
GB
Programme
Drying
end
3)
3)
Consumption
Litres
kWh
Minutes
5.0
0.02
10
13.0
0.70
30
16.0
1.05
120
16.0
1.65
90
17.0
1.90
125