Table of Contents
Advertisement
Touch the
button again.
v
3.
The end time
will be highlighted on the display.
y
Use the
or
button to delay the end time.
@
A
4.
The appliance will apply the settings after a few
seconds. The end time will be shown on the display.
Once the appliance starts, the time will begin counting
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
or
A
@
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
button to set the end time all the
A
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
To check the values for the different time-setting
options, touch the
button repeatedly until the
v
required symbol is indicated.
button to
@
button to change the end time.
Setting the timer
The timer runs alongside other settings.You can set it at
any time, even if the appliance has been switched off. It
has its own audible signal so that you can tell whether it
is the timer duration or a cooking time that has elapsed.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments.Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
@
button.
Touch the
v
button until the timer symbol
1.
highlighted.
Use the
A
or
@
button to set the timer duration.
2.
After a few seconds, the timer duration will start to
count down.
If the set timer duration is the duration for which
Tip:
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
or
A
@
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
button to reset the timer duration
A
all the way to zero. The timer is now switched off.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
To check the values for the different time-setting
options, touch the
button repeatedly until the
v
required symbol is indicated.
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
or
button to set the time.
A
@
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
You can go to the basic settings to specify
Note:
whether or not the time should be shown on the display.
~ "Basic settings" on page 16
Time-setting options
button and 10 minutes if
A
V
button to change the timer
button.
v
en
is
15
Advertisement
Table of Contents
