Toshiba Tecra M5 User Manual page 78

78
Getting Started
Using external display devices
Connecting to the S-video port
NOTE
1 Connect one end of the S-video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its S-video in port.
2 Connect the other end of the S-video cable to the S-video
port on the back side of the computer.
3 Turn on the external video device.
4 Set the display mode by pressing
Display Properties window. For more information, see
"Directing the display output when you turn on the
computer" on page
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor)
port on the left side of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
configuring the Display Properties settings.
Video cables are not included with your computer. To connect
a device to the S-video port, you must purchase an S-video
cable.
Fn + F5
79.
Fn + F5
or by using the
, or by