Toshiba Tecra M5 User Manual page 191

❖
Display—Allows you to change various default settings
for the built-in LCD display
When the computer restarts, it remembers the last
NOTE
configuration. If data does not appear on the display you are
using after starting in Standby Mode, press Fn + F5. For more
information, see
on the computer" on page
❖
CPU—Allows you to enable or disable CPU frequency
switching modes
Dynamically Switchable—This mode is the default
setting for your computer, and automatically changes the
processing frequency and decreases voltage depending
on the power source:
❖
AC Power—If your computer is connected to the AC
adaptor, the CPU frequency mode is set to high for
faster processing.
❖
Battery Power—If your computer is running on
battery power, the CPU frequency mode is set to low
for slower processing. Switching the CPU to low
allows you to conserve power and extend the
operating time of your battery.
Always High—Sets the CPU speed to high when using
either the battery or the AC adaptor
Always Low—Sets the CPU speed to low when using
either the battery or the AC adaptor
Toshiba Utilities
Toshiba Hardware Setup
"Directing the display output when you turn
79.
191