Installing A Memory Module - Toshiba Tecra M5 User Manual

54
Getting Started
Adding memory (optional)
NOTE

Installing a memory module

Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
small Phillips screwdriver for this procedure.
The computer has two memory slots—Slot A and Slot B. You
can install one or two memory modules.
Before adding external devices or memory, Toshiba
recommends setting up your software. See
software" on page
If the computer has been running recently, the memory module
may be hot. The surrounding area may also be hot. Allow the
module to cool to room temperature before replacing it. Avoid
touching the cover, the module, and the surrounding area
before they have cooled. Failure to follow these directions
could result in minor bodily injury.
To avoid damaging the computer's screws, use a small Phillips
screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
45.
"Setting up your