Filing Standard Saw Chain - Echo DPPF-2100 Operator's Manual

MAINTENANCE

Filing Standard Saw Chain

Level 2
Power Pruner
BAR P/N
254 mm (10 in.)
narrow bar
P/N 10A4CD3246
Check bar part number on your Power Pruner. Chain and guide bar
gauge size must be identical. Use bar and chain combinations shown
in table above.
Dull or damaged cutters will result in poor cutting performance,
increased vibration, and premature saw chain failure.
Always stop unit and remove battery before servicing guide bar
and saw chain. Always wear gloves when filing saw chain,
otherwise serious personal injury may result.
Drive Link
Tie Strap
Right Hand Cutter
Important points for proper maintenance of saw chain:
• Keep the cutters sharp at all times.
• Keep the left and the right cutters properly aligned.
36
®
Bar and Chain Combinations
CHAIN
CHAIN P/N
TYPE
80TXL46CQ
Preset Tie Strap
LINKS
80 46
Left Hand Cutter
Guard
Link
© 8/23 ECHO Incorporated
DPPF-2100
PITCH GAUGE
0.325 in. 0.043 in.
Top Plate
Side Plate
Depth
Gauge
X7508310400