Table of Contents
Advertisement
OPERATION
• When ready to cut, hold the
cutting shoe against the branch.
This will prevent whipping of the
branch. DO NOT use back and
forth sawing action.
• Look out for branches
immediately behind the branch
being cut. If saw chain hits a rear
branch damage to the saw chain
and guide bar may occur.
• Accelerate to full speed.
• Ease cutting pressure when
nearing end of cut to maintain
control.
• When pruning a limb 102 mm
(4 in.) diameter or larger cut as
follows:
1. Under cut 1/4 limb diameter
near tree trunk.
2. Finish top cut slightly farther
out on limb.
3. Flush cut stub at trunk.
• DO NOT use for felling or
bucking.
30
Correct
Cutting shoe against branch
Not Correct
Cutting shoe away from branch
Not Correct
Blade hits rear branch
© 8/23 ECHO Incorporated
DPPF-2100
X7508310400
Advertisement
Table of Contents
