Table of Contents
Advertisement
Step 8.
Close the cam handle so that the disk drive is fully seated into the mid plane and the handle clicks
into place.Be sure to close the cam handle slowly so that it aligns correctly with the face of the disk
drive.
Step 9.
If you are replacing another disk drive, repeat Steps 3 through 8.
Step 10. Verify the disk drive's activity (green) LED is illuminated.When the disk drive's activity LED is solid
green, it means the disk drive has power. When the disk drive's activity LED is blinking, it means
the disk drive has power and I/O is in progress.
Step 11. If you disabled disk ownership automatic assignment in Step 1, manually assign disk ownership,
and then reenable disk ownership automatic assignment if needed:
Display all unowned disks: storage disk show -container-type unassigned
a.
Assign each disk: storage disk assign -disk disk_name -owner owner_name
b.
You can use the wildcard character to assign more than one disk at once.
c.
Reenable disk ownership automatic assignment if needed:
storage disk option modify -node node_name -autoassign on
You need to reenable disk ownership automatic assignment on both controllers in an HA pair.
Step 12. If you are instructed to return the failed part, follow all packaging instructions and use any
packaging materials that are provided.
4
Service Guide for DM120S, DM240S, and DM600S
Advertisement
Table of Contents
