Hans Grohe AXOR Urquiola 11043 1 Series Installation Instructions / Warranty page 6

4
1.
5
1.
6
1.
6
3.
17 mm
1.
.
X + 1¾"
English
(1) Install the spindle extensions.
() Cut each spindle extension so that it extends ³⁄₁₆"
outside the surface of the finished wall.
.
(3) Remove the plug from the spout outlet.
(1) Install the slip connectors.
() Cut each slip connector so that it extends ⁵⁄₁₆"
outside the surface of the finished wall.
.
(1) Measure the distance from the spout outlet of the
rough to the outside of the plaster shield ("X").
() Cut the nipple so that it is X + 1¾" mm long.