Operation - Zephir ZCRB1200 Instruction Manual

COMPONENTS
 Main unit
 Base
 Mounting screws
 Tip – Over Switch
 Guide power cable
 Power cord
ASSEMBLY
 Assemble the body to the base according to the steps described below :
 Remove the screws from the bottom of the main unit.
 Insert the cable along the compartment located at the center of the base and assemble the body to the
base.
 Secure the body to the base using the two mounting screws removed earlier .
 Pass the cable along the guide and secure it with the clamp .

OPERATION


Plug the power cord into the outlet.

Check that the socket has a capacity of 10A at least.

Select the speed according to the switches on the front panel.

Press the SWING button to activate or deactivate the automatic oscillation .
SAFETY DEVICE
 This unit is provided with a safety device which stops the delivery of hot air in case the main unit is
damaged or fallen to the ground. The device is placed at the base of the unit.
MANTENANCE

The unit needs to be cleaned regularly.

Before each cleaning cycle , make sure the power cord is unplugged from the electrical outlet and that
the unit has cooled down completely

Clean the grids from dust with a soft cloth .

Do not use abrasive or chemical detergent that can spoil the main unit.
TECHNICAL SPECIFICATIONS
Voltage
220-240V~50Hz 600 – 1200W
Power Heating Elements
2 tubi