Beeper Options and Button Functions
Changing the Beeper Tone
Beeper tones may be configured incrementally using the following bar code. The new tone will be heard
followed by a short pause. Two more new tones will be heard signifying the new setting has been stored in
memory. The silent (no beep) tone is also selectable.
N
³
9 9 9 9 7 5
Changing the Beeper Volume
Volume levels may be configured using the volume button or incrementally using the following bar code.
The new volume will be heard followed by a short pause. Two more tones will be heard signifying the new
setting has been saved in memory. The silent (no volume) tone is also selectable.
The Multi-Function Button
Figure 35. Changing the Beeper
Volume
Figure 36. Laser & Motor Off
Power Save Mode
Figure 37. Normal Operation
42
Figure 34. The Multi-Function Button
Changing the Beeper Volume
A short (<3 second) depression and the beeper volume will change. The
new volume will be heard. The silent (no beep) volume is also
selectable.
Placing the Unit in Laser & Motor Off Power Save Mode
Long (>3 seconds) depression. The Laser and Motor Off Power Save
Mode is the only power save mode that can be activated with the multi-
function button*.
* This feature is configuration dependent. Refer to the MetroSelect
Configuration Guide (PN 00-02407x) under Scanner Operation:
Power Save Modes to enable this feature.
Waking the Unit from All Power Save Modes
The next button depression will awaken the scanner for normal
operation.
N
³
9 9 9 9 7 4