Recommended Fuels; Technical Data - Stanley Solis I60 Installation And Operating Instructions Manual

Single sided woodburner insert
Table of Contents

Advertisement

RECOMMENDED FuELS

All fuels should be stored under cover and kept
as dry as possible prior to use.
This appliance has been tested using seasoned
wood logs and ONLY WOOD LOGS, WITH A MOIS-
TuRE PERCENTAGE OF LESS THAN 20%, MuST
BE uSED IN THIS APPLIANCE.
Do not use fuels with a Petro-coke ingredient as this
may cause the grate to overheat, causing damage.
Reduced outputs will result when fuels of lower
calorific values are used. Never use gasoline or
gasoline type lantern fuel, kerosene, charcoal lighter
fluid or similar liquids to start or freshen up a fire in
this heater. Keep all such liquid well away from the
heater at all times. Operate the stove only with the
fuelling door closed except for re-fuelling.
Nominal Output: (kW)
Mean Flue Gas Temperature
Typical refuelling intervals to obtain nominal outputs:
Fuel Load to achieve nominal power
Maximum Fuel load
CO at 13% O
2
Gross Weight
Flue Outlet
Efficiency
Flue Draught
Log Size
Energy
Efficiency
Model
Class
A +
I60SS
Warning. – During the use of your stove or inset appliance, the high temperatures generated during
combustion and cooling down of the device afterwards will cause expansion and contraction of the
steel plates. This may cause some metallic sounds; these are completely normal and should not be
considered a defect in the product.

TECHNICAL DATA

o
C
Heat Output
Heat Output
to Room
to Water
6.2
N/A
Energy
Efficiency
Preferred
Index
Fuel
108
Wood
13
6.2 kW
214
0.75 hrs
1.2 Kg
1.8 Kg
0.06%
70 kg
150mm (6")
81%
12Pa
550mm
Nominal
Heat
Net
Output
Efficiency
6.2
81

Advertisement

Table of Contents
loading

Table of Contents