Detach Machine from Tractor
1. Secure jack as shown using pin (A).
Figure 2: Wiring Harness and Hoses in Storage
Position
2. Disconnect wiring harness and place
in storage position.
WARNING: Prevent serious injury or
death.
Relieve
pressure
before
hydraulic hoses.
3. Disconnect hydraulic hoses and
place them in their storage position.
ATTACHING and DETACHING
ATTACHING and DETACHING
hydraulic
system
disconnecting
Rotary Hoe RH15 / RH18
4. Disconnect safety chain (A).
Adjust Hitch Height
Verify machine is parked safely before
performing hitch adjustment to avoid injury or
death caused by uncontrolled machine
movement.
1. Remove and retain cap screws.
2. Lower hitch assembly and retain
using existing cap screws.
3. Tighten the cap screws to 873 N-m
(644 ft-lbs.)
Page 40