Cau琀椀On For All Machines; Unfolding/Extending The Toolbar - Fast RH15 Owner's Manual

Caution for All Machines
CAUTION: When transporting the
machine on a smooth surface road, do
not exceed the maximum transport
speed of 32 km/h (20 MPH). Reduce
speed considerably when traveling
over rough ground.
Reduce speed when turning. Do not
uncouple tractor brake pedals and apply
individually in an attempt to make a tighter
turn.
Serious injury or death can result from
contact with electric lines. Use care when
moving or operating this machine near
electric lines to avoid contact. Know
transport height and width of machine.
Check local regulations before transporting.
(See Machine Dimensions & Specifications
for transport height and width of machine.)
Transport with wings fully folded. Never raise
or lower the center section or wings when
moving. After folding, ALWAYS place the fold
valve(s) in the neutral position for transport.
If wing-fold cylinders are removed or
damaged, chain wings together to prevent
injury or death caused by accidental falling of
wings on you or others.
TRANSPORTING

Unfolding/Extending the Toolbar

WARNING: Prevent serious injury or
death. The machine coming near or
contacting power lines can cause
electrocution.
occur without contact. Fully lower
wings before moving or transporting.
IMPORTANT: Raise the Rotary Hoe off
the
unfolding.
IMPORTANT: Never back the Rotary
Hoe with the hoe wheel touching the
ground.
1. Remove crossbar from rear of wings
2. Pull SCV II backward to release field
3. While backing up, pull backward SCV
4. Disengage SCV I and SCV II.
Rotary Hoe RH15 / RH18
TRANSPORTING
Electrocution
ground before
and place in Storage Position.
latches. Stop before the wing wheels
begin to turn.
I and SCV II and hold until wings are
unfolded. Stop when wings are fully
extended and latched and wheels are
straight.
can
folding or
Page 43