Specifications; Before Assembly - Schwinn 570T Assembly Manual / Owner's Manual

Table of Contents

Advertisement

SPECIFICATIONS

89.4 cm
( 35.2" )
89.4 cm
( 35.2" )
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 211.3 cm x 396.7 cm ( 83.2" x 156.2" ). Be sure that the workout
space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum
incline of the machine.
Basic Assembly Tips
Follow these basic points when you as-
semble your machine:
• Read and understand the "Important
Safety Instructions" before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches, turn
the bolts and nuts to the right (clock-
wise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed
otherwise.
• When attaching 2 pieces, lightly lift and
look through the bolt holes to help insert
the bolt through the holes.
• The assembly can require 2 people.
8
Maximum User Weight:
Maximum Inclined Deck Height:
Assembled Weight:
146.3 cm
Total Surface Area (footprint) of equipment: 17522.4 cm
( 57.6" )
Power Requirements:
Operational Voltage:
Operating Current:
196 cm
Heart Rate Chest Strap:
( 77.2" )
Sound Emission:
load. Noise emission under load is higher than without load.
Complies with the following:
165.9 cm
( 65.3")
Connectivity:
125.2 cm
( 49.3" )
2.11m
( 83.2" )
136 kg (300 lbs)
43.7 cm ( 17.2 inches )
97.5 kgs (approx. 215 lbs)
220V - 240V AC, 50Hz
8 A
1 CR2032 battery
Less than 70 db average without
ISO 20957 Compliant
3.97m ( 156.2" )
0.6m
( 24" )
0.6m
( 24" )
2
SAA Compliant
2m
( 79" )

Advertisement

Table of Contents
loading

Table of Contents