Reversing The Door Opening Side; Door Open Alert; Maintenance And Cleaning - Beko B3RFNE294W User Manual

Dairy Products
Cheese (except feta
cheese)
Butter, margarine
7.3 Reversing the Door Opening
Side
The door opening side of your refrigerator
can be reversed according to the place you
put it. When you need this, you should def-
initely call the nearest Authorized Service.

7.4 Door Open Alert

The door open alert system of your refriger-
ator may differ depending on the model.
Version 1;
If the door of the product remains open for
a certain time (between 60 s and 120 s), an
audio warning signal sounds; depending on

8 Maintenance and Cleaning

WARNING:
Read the "Safety Instructions" sec-
tion first.
WARNING:
Unplug the refrigerator before
cleaning it.
• Do not use sharp or abrasive tools to
clean the product. Do not use materials
such as household cleaning agents,
soap, detergents, gas, gasoline, thinner,
alcohol, wax, etc.
Preparation
By placing foil thereb-
etween, in slices
In its own packaging
Longest Storage Time
(Month)
6-8
6
the product model, a visual warning signal
(light flash) can also be displayed. If you
close the door of the device or press a but-
ton on the screen of the device, if any, the
warning sound will stop.
Version 2;
If the door of the device remains open for a
certain period of time (between 60 s and
120 s), the door open alert is sounded. The
door open alert is sounded gradually. First,
an audible warning starts to sound. After 4
minutes, if the door is still not closed, a
visual warning (lighting flash) is activated.
The door open alert will be delayed for a
certain period of time (between 60 s and
120 s) when any key on the product screen,
if any, is pressed. Then the process will
start again. When the device door is closed,
the door open alert will be cancelled.
• The dust shall be removed from the vent-
ilation grill on the rear of the product at
least once a year (without opening the
cover). Clean the product with a dry cloth.
• Take care to keep water away from the
lamp's cover and other electrical parts.
• Clean the door with a damp cloth. Re-
move all contents to remove the door
and body racks. Remove the door racks
by lifting them upwards. Clean and dry
the shelves, then attach back in place by
sliding from above.
EN / 22
Storage Conditions
It can be left in its original pack-
aging for short term storage. For
long-term storage it should also
be wrapped in aluminium or
plastic foil.
In its own packaging or in plastic
containers