Table of Contents
Advertisement
6. Use the Increase() or Decrease() buttons to adjust the Maximum Speed of the Belt, and push OK. The Profile
Program will adjust so the Maximum Speed value is the highest Speed of the Profile Program when accepted.
During a Workout, the User can directly adjust the speed of the belt above the Maximum Speed setting if
desired.
7.
Use the Increase() or Decrease() buttons to select a type of Goal (Distance, Time or Calories), and push OK.
8. U se the Increase() or Decrease() buttons to adjust the workout value, and push OK.
9. The Console will display the "READY ?" prompt.
10. Push START to begin the goal-oriented workout. The workout will begin after a three second, audible countdown.
Note: The Console will display "RAMPING UP" as the Walking Belt gets up to speed.
Heart Rate Control Workout Programs
The Heart Rate Control programs let you set a heart rate goal for your workout. The program monitors your heart rate in
beats per minute (BPM) from the Contact Heart Rate (CHR) sensors on the machine or from a Heart Rate Monitor (HRM)
chest strap, and adjusts the incline during a workout to keep your heart rate in the selected zone.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the Heart Rate
Control program to work correctly.
The Target Heart Rate programs use your age and other User information to set the Heart Rate Zone values for your
workout. The console display then gives prompts for you to set up your workout:
1. Push the PROGRAMS button until the HEART HEALTH Category is selected.
2. Push the Increase() or Decrease() buttons to select the percentage of maximum heart rate: HEALTHY 55%, FAT
BURN 65%, AEROBIC 75%, ANAEROBIC 85%.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in
your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again.
Use the values calculated or measured by the machine's computer for reference purposes only. The heart
rate displayed on the console is an approximation and should be used for reference only.
3. Push the Increase() or Decrease() buttons to set the Minimum Speed, and push OK.
4. Push the Increase() or Decrease() buttons to set the Maximum Speed, and push OK.
5. Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
6. Push the Increase() or Decrease() buttons to set the goal value for the workout, and push OK.
Note: Be sure to allow time for your heart rate to reach the desired heart rate zone when setting the goal. The Console
will display the heart rate value based on the current User settings.
7. Push START to begin the workout.
A User can also set a Heart Rate Target value by selecting the HR TARGET program in the CUSTOM Category. The Con-
sole will adjust the incline during a workout to keep the User in the desired Heart Rate zone.
1. Push the PROGRAMS button until the CUSTOM Category is selected.
2. The Console shows the HR TARGET workout. Push OK.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in
your chest, become short of breath, or feel faint. Contact your doctor before you use the machine again.
Use the values calculated or measured by the machine's computer for reference purposes only. The heart
rate displayed on the console is an approximation and should be used for reference only.
38
Advertisement
Table of Contents
