Samsung WD BB Series User Manual page 27

For models with an additional hot water inlet:
Check valve (applicable models only)
Aqua stop hose (applicable models only)
A
NOTE
The end of the aqua stop hose must be fitted to the water tap and not the machine.
Untitled-7 27
1. Connect the red end of the hot water hose to the hot
water inlet on the back of the machine.
2. Connect the other end of the hot water hose to the
hot water tap.
Before connecting the water hose to a water tap, connect
the supplied check valve to the water tap and then
connect the water hose.
The aqua stop hose alerts users of a risk of water leaks.
It senses the water flow and turns red on the centre
indicator (A) in case of a leak.
English 27
2023-05-04 5:21:28