Samsung WD BB Series User Manual page 25

WARNING
If there is a water leak, stop operating the washing machine and disconnect it from the electrical supply.
Then, contact a local Samsung service centre in case of a leak from the water hose, or contact a plumbing
technician in case of a leak from the water tap. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-
pressure hose.
Connecting to a non-threaded water tap
Untitled-7 25
3. Slowly open the water tap and check if there are any
leaks around the connection areas. If there are water
leaks, repeat step 1 and 2.
1. Remove the adaptor (A) from the water hose (B).
A
B
2. Use a Phillips screwdriver to loosen four screws on
the adaptor.
English 25
2023-05-04 5:21:27