Samsung WD BB Series User Manual page 26

Installation
C
D
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is connected
properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring before
inserting the tap into the adaptor.
26 English
Untitled-7 26
3. Hold the adaptor and turn part (C) in the arrow
direction to loosen it by 5 mm (*).
4. Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
C
6. While pulling down part (D) on the water hose,
connect the water hose to the adaptor. Then, release
part (D). The hose fits into the adaptor with a clicking
sound.
7. To complete connecting the water hose, see 2 and 3
on the "Connecting to a threaded water tap" section.
2023-05-04 5:21:27