Table of Contents
Advertisement
To stop the program temporarily, press the Stop
button. The Time/Incline/Segment
Time display
will begin to flash. To restart the program, press
the Start button or the Speed A button. To end the
program, press the Stop button, remove the key,
and then reinsert the key.
B
Follow your progress
with the displays.
See step 5 on page 10.
_._ Measure your heart rate, if desired.
See step 6 on page 11.
r_
When the program is completed, remove the
key from the console.
When the program has ended, make sure that
the incline of the treadmill is at the lowest set-
ting. Next, remove the key from the console and
put it in a safe place. Note: If the displays end
various Indicators on the console remain lit
after the key is removed, the console is in the
"demo"
mode. See page 20 end turn off the
demo mode.
When you are finished using the treadmill, unplug
the power cord.
Follow the steps below to use a heart rate program.
Note: You must wear the optional chest pulse sen-
sor (see page 20) to use a heart rate program.
D
Put on the chest pulse sensor.
See the instructions included with the optional
chest pulse sensor.
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page
10.
I_1 Select e heart rate program.
When the key is
inserted, the
manual mode
will be selected.
To select a
heart rate pro-
gram, press the
Program button repeatedly until one of the two
heart rate program indicators lights.
The two profiles on the left side of the console
show how the target heart rate will change during
the programs. The numbers above the profiles
represent percentages of your estimated maxi-
mum heart rate. Note: Your estimated maximum
heart rate is determined by subtracting your age
from 220. For example, if you are 30 years old,
your estimated maximum heart rate is 190 beats
per minute (220 - 30 = 190). If you are 30 years
old, a target heart rate setting of 50% is equal to
95 beats per minute (50% of 190 is 95).
13
Advertisement
Table of Contents
