I/O Configuration; Current Input 1 To N; Status Input 1 To N; Current Output 1 To N - Endress+Hauser Proline Promass I 300 PROFIBUS PA Operating Instructions Manual

Commissioning
Parameter
Fail safe type
Fail-safe value
* Visibility depends on order options or device settings
Parameter
I/O module 1 to n terminal numbers Shows the terminal numbers used by the I/O
I/O module 1 to n information
I/O module 1 to n type
Apply I/O configuration
Alteration code
* Visibility depends on order options or device settings
96
Prerequisite
–
In Fail safe type parameter,
the Fail-safe value option is
selected.
10.6.6 Displaying the I/O configuration
The I/O configuration submenu guides the user systematically through all the parameters
in which the configuration of the I/O modules is displayed.
Navigation
"Setup" menu → I/O configuration
‣

I/O configuration

I/O module 1 to n terminal numbers
I/O module 1 to n information
I/O module 1 to n type
Apply I/O configuration
Alteration code
Parameter overview with brief description
Description
module.
Shows information of the plugged I/O
module.
Shows the I/O module type.
Apply parameterization of the freely
configurable I/O module.
Enter the code in order to change the I/O
configuration.
Description
Select the failure mode.
Specify the values to be output
when an error occurs.
User interface / Selection /
User entry
• Not used
• 26-27 (I/O 1)
• 24-25 (I/O 2)
• Not plugged
• Invalid
• Not configurable
• Configurable
• Profibus PA
• Off
• Current output
*
• Current input
*
• Status input
• Pulse/frequency/switch
*
output
• No
• Yes
Positive integer
Proline Promass I 300 PROFIBUS PA
Selection / User Factory setting
entry
• Fail-safe value Off
• Fallback value
• Off
Signed floating-point 0
number
Factory setting
–
–
Off
*
No
0
Endress+Hauser
→  96
→  96
→  96
→  96
→  96