Table of Contents
Advertisement
Heater Ass'y
① After disassembling the cabinet cover and removing
the thermistor sensor, housing, and M10 nut, pull
the heater.
(After reassembly, the heater should be inserted
into the tub floor bracket; fasten the M10 nut
sufficiently to assemble.)
After fixing the heater, turn the drum with the
hands to confirm that it is engaged properly.
If the assembly is done improperly, the heater hits
the drum, and noises are generated.
② When servicing the "turbidity sensor," which
measures the soiling level of the laundry, remove
the harness of the part circled in green and pull
both sides of the harness to remove it.
45
Advertisement
Table of Contents
