Table of Contents
Advertisement
Door Ass`y & Hinge Ass`y
① Remove 4 hexagonal bolts and 1 screw between
the hinge and cabinet cover.
※ Upon reassembly, insert the harness into the
indicated square hole.
② Open the top plate and remove the housing of the harness
connected to the door.
1) Remove 2 cable ties connected to the harness
2) Remove the housing.
③ Remove 5 screws and disassemble the hinge.
※ Make sure that the tool fastening torque is 20–30 kgf・cm.
(3–6 levels of general tools)
44
④ Housing connected to the disp. PCB
should be removed, and the harness
is separated in the direction indicated
by an arrow.
Advertisement
Table of Contents
