Gxv3651 Maintenance Page - Grandstream Networks GXV3651 Series User Manual

Privilege – The privilege for the user to access to configuration page.
Allow Anonymous Login – If 'Allow Anonymous Login' is set to Yes, no user name and
password are required to login to the GXV3651 web configuration pages.
If you login anonymously, you will not be able to change any settings.

GXV3651 Maintenance Page

Server Maintenance
Restart – Click this button to restart the GXV3651.
Restore – Click this button to perform a
partial factory reset (The IP address will
not be cleared) .
Firmware Upgrade and Provisioning Items
Upgrade via – This field lets you
choose the firmware upgrade
method. The GXV3651 supports
HTTP, HTTPS and TFTP.
Firmware Server Path – The IP
address or domain name of the
firmware server (the location of the
firmware files) .
Automatic Upgrade Interval – Enter the frequency (in minutes) in which the
HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or configuration
changes.
Automatic Upgrade – The default setting is "No." Choose "Yes" to enable automatic.
HTTP/HTTPS/TFTP upgrade and provisioning. When set to "No", the IP Camera will only
perform a HTTP/HTTPS/TFTP upgrade and perform a configuration check once during the
boot process.
Performing a firmware upgrade:
1. Download the firmware package from http://www.grandstream.com/firmware.html.
2. Unzip the firmware package and copy the files to the firmware upgrade server
directory.
Upgrades are supported via TFTP, HTTP and HTTPS.
3. Log in to the Maintenance page of the GXV3651. Select the server type from the
dropdown list under the "Upgrade Via" field. Enter your server's root directory in the
"Firmware Server Path" field.
4. Reboot the GXV3651 to begin the firmware upgrade process.
Firmware 1.0.4.6
Grandstream Networks, Inc. 09/2010
GXV3651 IP Camera
Page 22 of 35