Rear View; Built-In Interfaces - Watchguard Firebox T85-PoE Hardware Manual

Firebox T85-PoE Hardware Guide

Rear View

Rear view of the Firebox:
Reset Button
This resets the device. To restore the device to factory-default settings, see
Default Settings
Power Switch
Controls the power supplied to the device. Move the switch to position 1 to power on the device, or
position 0 to power it off.
Power Input
An AC power adapter is included with your device. Connect the AC adapter to the device and to a
power source. The power supply tip is plus (+) polarity. Use only the supplied AC power adapter.

Built-In Interfaces

Serial Port (Console)
The leftmost port is an RJ45 serial console port. An RJ45 serial cable is not included with the
device.
USB Interfaces
The device includes two USB interfaces. Connect a USB storage device for USB backup and
restore, or to store a support snapshot. For more information, see
Network Interfaces
The Ethernet interfaces have standard RJ45 connectors and support link speeds of 10, 100, or
1000 Mbps. These interfaces are labeled 0/WAN, 1/LAN, 2, 3, 4, 5, 6-PoE, 7-PoE. Interfaces 6
and 7 are PoE (Power over Ethernet) interfaces, compliant with the IEEE 802.3at standard.
11
.
Restore Factory-
Fireware Help.
WatchGuard Technologies, Inc.