Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
Page 5
Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. ...
Page 6
device if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. The supply cable must be disconnected from the socket only by pulling the plug. ...
1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. All technical activities like installation and maintenance must be performed by the qualified service personnel only. The device is not designed for continuous operation in the industrial applications. The device is intended for home use or in similar places such as: ...
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Overview of parts ON/OFF switch Feet (4) Power cord Temperature control Ventilation slots Ceramic heating plate Handle (2) Digital display - 23 -...
Never place the device at the edge of a table to avoid tilting or falling. Never put the device in a moist or wet area. Do not place the device near open flame, electric heaters or other heat source. ...
Page 13
After the set temperature is reached, the red control light will be off. When the plate has cooled down, the appliance will start re-heating and the control light appear again. This function prevents overheating of the electric hot plate. ...
6. Cleaning WARNING! Before cleaning disconnect the device from the power supply (pull the plug!). Wait for the device to cool down. Do not use pressurized water jest for cleaning! Protect the device from the water penetration. o Clean the unit regularly. o Clean the electric hot plate with a soft, damp cloth.
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 33154 Salzkotten phone: +49 (0) 5258 971-0 Germany...
Need help?
Do you have a question about the 1K2200 GL and is the answer not in the manual?
Questions and answers