Troubleshooting - JUNO JB084C1 User Manual

Hide thumbs Also See for JB084C1:
Table of Contents

Advertisement

12.6 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.
The door gasket is
damaged.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
Before you replace the lamp:
Step 2
Disconnect the oven from the
Check if...
The fuse is blown.
Do not use the oven.
Contact an Authorised
Service Centre.
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
mains.
Problem
The display shows
"12.00".
The water leaks out of
the cavity emboss‐
ment.
Unsatisfying cooking
performance of the
function: True Fan
Cooking PLUS .
The lamp does not
work.
Step 3
Put a cloth on the bottom of the
cavity.
Check if...
There was a power
cut. Set the time of
day.
There is too much wa‐
ter in the cavity em‐
bossment.
You filled the cavity
embossment with wa‐
ter.
The lamp is burnt out.
ENGLISH
21

Advertisement

Table of Contents
loading

Table of Contents