B9-Send All Characters Up To A String; E9-Send All But The Last Characters - Honeywell N4680 User Manual

Using the bar code above, send all characters up to but not including "D," followed
by a carriage return.
Command string: F3440D
F3
44
0D
The data is output as:
1234567890ABC
<CR>
B9—Send all characters up to a string
Include in the output message all characters from the input message, starting with
the character at the current cursor position and continuing to, but not including,
the search string "s...s." The cursor is moved forward to the beginning of the "s...s"
string. Syntax = B9nnnns...s where nnnn stands for the length of the string, and s...s
stands for the string to be matched. The string is made up of hex values for the
characters in the string. Refer to the
beginning on page 216 for decimal, hex and character codes.
B9 Example: Send all characters up to a defined string
Using the bar code above, send all characters up to but not including "AB."
Command string: B900024142
B9
0002
41
42
The data is output as: 1234567890
E9—Send all but the last characters
Include in the output message all but the last "nn" characters, starting from the
current cursor position. The cursor is moved forward to one position past the last
input message character included. Syntax = E9nn where nn stands for the numeric
value (00-99) for the number of characters that will not be sent at the end of the
message.
70
"Send all characters up to a particular character" command
Hex value for a 'D"
Hex value for a CR
"Send all characters up to a string" command
Length of the string (2 characters)
Hex value for A
Hex value for B
ASCII Conversion Chart (Code Page 1252),
N4680 2D Decoded Scan Engine User Guide