Imgbox Modifiers - Honeywell N4680 User Manual

The IMGBOX commands have many different modifiers that can be used to change
the size and appearance of the signature image output by the scan engine. Modifi-
ers affect the image that is transmitted, but do not affect the image in memory. Any
number of modifiers may be appended to the IMGBOX command.
Note: The IMGBOX command will return a NAK unless a window size (width and height) are
specified. See
Signature Capture Area

IMGBOX Modifiers

A - Output Image Width
This option is used to size the image horizontally. If using this option, set the reso-
lution (R) to zero.
B - Output Image Height
This option is used to size the image vertically. If using this option, set the resolu-
tion (R) to zero.
D - Pixel Depth
This indicates the number of bits per pixel in the transmitted image, which defines
whether it will be grayscale or black and white.
•
•
F - File Format
This option indicates the type of file format in which to save the image.
•
170
H - Height of Signature Capture Area
Example of Image Width set to
Example of Image Width set to
Example of Image Height set to 50B:
Example of Image Height set to 100B:
8D8 bits per pixel, grayscale image (default)
1D1 bit per pixel, black and white image
0FKIM format
(page 172).
N4680 2D Decoded Scan Engine User Guide
(page 171) and W - Width of