Table of Contents
Advertisement
Aztec Code Message Length
Scan the bar codes below to change the message length. Refer to
Description
= 1-3832. Minimum Default = 1, Maximum Default = 3832.
Minimum Message Length
Aztec Append
This function allows the scanner to append the data from several Aztec bar codes
together before transmitting them to the host computer. When the scanner
encounters an Aztec bar code with the append trigger character(s), it buffers the
number of Aztec bar codes determined by information encoded in those bar codes.
Once the proper number of codes is reached, the data is output in the order speci-
fied in the bar codes. Default = On.
Aztec Code Page
Aztec Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
characters should then appear properly.
146
(page 86) for additional information. Minimum and Maximum lengths
* On
on page 222), and scan the value and the Save bar code
Programming Chart
on the inside the back cover of this manual. The data
Aztec Code Page
N4680 2D Decoded Scan Engine User Guide
Message Length
Maximum Message Length
Off
ISO 2022/ISO 646
Advertisement
Table of Contents
