Table of Contents
Advertisement
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default =
Off.
UPC-E0 Redundancy
If you are encountering errors when reading UPC-EO bar codes, you may want to
adjust the redundancy count. Redundancy adjusts the number of times a bar code
is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To
adjust the redundancy, scan the UPC-EO Redundancy bar code below, then scan a
redundancy count between 0 and 10 on the
Save bar code. Default = 0.
UPC-E0 Addenda Required
When Required is scanned, the scanner will only read UPC-E bar codes that have
addenda. Default = Not Required.
N4680 2D Decoded Scan Engine User Guide
On
Required
Programming
UPC-EO Redundancy
* Off
Chart. Then scan the
* Not Required
113
Advertisement
Table of Contents
