Table of Contents
Advertisement
UNLOADING FILM (Remofe die film from the camen in the shade or by using your body to
(|ie camera)
1. Rewinding the film
After you have exposed the last frame of the
roll, the lens retracts and the film rewinds auto¬
matically. After rewinding, the motor stops,
and [ 0 ] blinks as shown to indicate that the
film has been rewound.
• [ 0 ] blinks for approx. 5 sec. after the whole
film roll is rewound.
• A 24-exposure roll of film takes about 20 sec¬
onds to be rewound.
• The entire roll of film including the film
leader is always rewound into the cartridge
to prevent any part of the film being exposed
to light.
18
^
2. Unloading the film
To unload the film, open the back cover, and
remove the cartridge from the chamber by pull¬
ing the top out first .
Notes:
• Never open the back cover until the whole
film roll is rewound,
• The shutter may be released a frame or two
even after the specified number of frames
have been used up as indicated by the num¬
ber of shots shown on the film cartridge. If
this occurs, these extra frames may be lost in
processing.
Advertisement
Table of Contents
