Table of Contents
Advertisement
2. Place the film cartridge in the film chamber
by fitting its flat side on top of the rewind
shaft first and then top end into the camera.
3. Pull the film leader out far enough from the
cartridge to reach the take-up spool. Align
the tip of the film with the film leader end
mark O.
4. Close the back cover. The film automatically
advances to the first frame.
X
Slack No !
OFiat Yes !
the film guides.
• If there is dirt on the film detector 0, film
cannot be wound properly.
• Ensure the film is taut as illustrated on the il¬
lustration to the left. Take up any slack in
the film by pushing it back into the cartridge.
• If the end of the film leader is extremely
bent, straighten it or cut off the bent portion.
11
Advertisement
Table of Contents
